Our Location
A/3, Vishvakarma Estate, Singarva Road,
Kathwada - 380038, Ahmedabad.Call Us
+91 98246 91441
+91 90333 03015E-Mail Id
saipower3ph@gmail.com
Our Location
A/3, Vishvakarma Estate, Singarva Road,
Kathwada - 380038, Ahmedabad.
Call Us
+91 98246 91441
+91 90333 03015
E-Mail Id
saipower3ph@gmail.com
Home|Electric Motor
(0.25 H.P. To 60 H.P.)
(0.25 H.P. To 60 H.P.)
(0.25 H.P. To 10 H.P.)
(0.25 H.P. To 3 H.P.)
Electric motor systems are predictable to account for 46% of worldwide power use. convert electrical energy to mechanical power, they rotate pumps, force compressors, move resources and run fans, blowers, drills or mixers. Electric motors might properly be called the “workhorses” of manufacturing.
For Manufacturing Application Alone, It’s Predictable That Electric Motor System Account For About 70% Of Electrical Energy Use. As Such Massive Customers Of Electrical Energy, Still Small Improvement Can Guide To Large Power Investments.
The IEC Has Put In Rest Energy Competence Lessons For Electric Motors, Known As The IE Code, Which Are Summarize In IEC Global Standard: IEC 60034-30-1:2014. The Typical Includes Four Level Of Motor Competence
| Rating | 0.12 TO 45KW |
| Frame Size | 63 TO 225L |
| RPM | 3000, 1500, 1000, 750 |
| Construction | (B3) FOOT , (B5) FLANGE , (B14) FACE and Combination |
| Voltage / Frequency | 415 + 10% / 50 + 5% |
| Frame | Cast Iron for Motors in 63 to 180 frames with rugged construction |
| End shields | End shields are with Cast Iron |
| Terminal Box | Position on top box motors in 63 to 225 frame. Terminal box can be rotated in the step of 90 through 360° for desired cable entries direction. Cable gland suitable to 3/4" to 1" with BS conduit threading |
| Shaft | Material EN8 with threaded center for locking of pulley / gear |
| Bearings | Double Seal Ball Bearings capable of taking axial loads in both the directions at high speeds |
| Protection | IP-55/44 by means of `V' ring seals and oil seals to prevent penetration of solid contaminants / moisture into the motor |
| Momentary Overload | 1.6 times of rated torque for 15 seconds |
| Insulation class | F' class with temp rise limited to `B' class |
| Rotors | Squirrel cage, Aluminum pressure die cast dynamically balanced with half key to maintain low. vibration levels |
| Winding | Wound with class `F' copper wire and impregnated with class `F' varnish |
| Electric supply & variations | 415V ±10%, 50Hz ±5% and combined variations ±10% unless otherwise specified |
| Duty | Continuous (S1) |
| Starting Up | 5 seconds for 2 starts from cold conditions |
| Service factor | Service factor 1.1 at rated voltage and frequency with class `F' temp. rise |
| Ambient Temp | 40°C |
Copyright All Rights Reserved © 2021. Sai Power || Powerd by - A1 Infosoft
